top of page

What Tension Should I Use?

Tomas Stilwell
Oct 4
4 min read

In short: higher tension generally gives more control and lower tension generally gives more power. The right tension is the one that works with your swing, your racquet and your string, so start in a sensible place and adjust.

Tension is another one of those things that is highly personal.

There are guidelines, and every racquet has a recommended tension range printed on it, but ultimately the right tension is the one that works best with your swing, your racquet and your choice of string.


The Basic Principle

Higher tension = generally more control

Lower tension = generally more power

When we talk about power and control in stringing, we’re not talking about how hard someone hits the ball or how accurate they are. We’re talking about how easily the stringbed helps the ball travel deep into the court.

A lower tension allows the strings to deflect further at impact, creating more of a “trampoline effect” and helping to generate additional power. A higher tension reduces that movement, producing a firmer stringbed that generally gives the player more control over the power being generated.

But, as with almost everything in stringing, there are exceptions and different ways to achieve the same result.

Natural gut, multifilament and synthetic gut are often strung at higher tensions than polyester, because they are more elastic and naturally provide more power. Polyester is generally used at lower tensions because of its firmer construction and lower-powered response.

String type

Starting range

Natural gut / multifilament / synthetic gut

50–60 lb / 23–27 kg

Polyester

45–55 lb / 20–25 kg

 

These are starting points rather than rules. Racquet head size, string pattern, gauge, string construction, playing style and personal preference can all influence the appropriate tension.

Junior players will often benefit from being towards the lower end of an appropriate range, although the complete setup should always be considered rather than choosing tension in isolation.

If you’re unsure, a good starting point is around the middle of the racquet manufacturer’s recommended range when using a softer string. With polyester, starting around 10% lower can be a useful reference point, particularly if you’re moving from a softer string.

The important thing is to create a starting point that you can learn from. When you next restring, think about how the racquet performed during the first few days and weeks:

•      Did you have enough power?

•      Did you have enough control?

•      Did the racquet feel comfortable?

•      Did you get the amount of spin you were looking for?

From there, we can make small adjustments.

It’s important to base those changes on how the racquet performed when the strings were still playing well. String tension and elasticity change over time, so if you only restring every three months and base your next tension entirely on how the racquet felt during the final few weeks, you may simply be reacting to an old, tired stringbed. Fresh strings will always feel different from strings that have been in a racquet for several months.

The String

The type of string you choose is one of the biggest factors.

With the increased use of polyester, average playing tensions have generally come down. When Tom first started stringing, the middle of a racquet’s recommended range would often be in the high 50s in pounds. On many modern frames, it is much closer to 50 lb.

Polyester has less elasticity and generally produces less power than softer strings, so it is commonly used at lower tensions. This allows the stringbed to move more freely and can help players access the spin and power potential of the string. Softer strings such as natural gut and multifilaments are more elastic and powerful, so increasing the tension can help bring that power under control.

Gauge also matters. Thicker strings are generally more durable and can produce a firmer, more controlled response, while thinner strings tend to provide more feel, power and spin potential but are less durable. Tension can be adjusted to help balance these characteristics.


Racquet Head Size

A larger head generally provides a larger sweet spot and can produce more power. A smaller head generally provides a more compact hitting area and can produce a firmer, more controlled response.

As a result, players using larger, more powerful frames may sometimes benefit from a slightly higher tension, while a smaller or less powerful frame may suit a lower tension. This isn’t a rule, though. The racquet’s overall construction and the player’s preferences are equally important.


String Pattern

String pattern can have a significant effect on how a racquet plays.

An open string pattern allows the strings to move more freely, which can provide more string movement, spin potential and power. A denser string pattern restricts string movement and generally produces a firmer, more controlled response.

Because of this, a player using an open pattern may choose a slightly higher tension to control the additional movement and power, while a dense pattern can sometimes benefit from a lower tension to provide a little more response. Again, these are starting points rather than rules.


Racquet Flexibility

A more flexible racquet generally produces less power and holds the ball on the stringbed for longer. A stiffer racquet tends to return more energy to the ball and can therefore feel more powerful and direct.

This can influence tension choice, but it shouldn’t be considered in isolation. A flexible racquet doesn’t automatically require low tension, just as a stiff racquet doesn’t automatically require high tension. The string, racquet head size, string pattern and the player’s swing all need to be considered together.

Two players can use the same racquet, the same string and even have very similar playing styles, but prefer completely different tensions.

That’s because tension isn’t simply about following a number printed on the racquet. It’s about finding the point where the racquet, string and player work together.

Small changes can make a surprisingly noticeable difference, which is why we generally prefer to establish a starting point and then make adjustments based on how the racquet actually performs in the player’s hands.

The best tension isn’t necessarily the tension recommended by the racquet manufacturer, your coach or your favourite professional player. It’s the tension that gives you the response you need from your own equipment and your own game.


Recent Posts

See All

Comments


bottom of page